logo
accountaccount

Surge Vessel - PAA Type 5.5m3
Surge Vessel - PAA Type

Surge vessel 5.5 M3 Volume: 5500 liters Position: Vertical Type: PAA (Piege A Air) Maximum Service Pressure: 4 Barg Hydrostatic test Pressure: 7 Barg Structural Calculations at Temperature: 60 C Manufacture Code: Codap95 Outlet flange: DN 400, PN 16 The vessels will be equipped with an vacuum/air release valve, DN 80 Note: - The offered water hammering protection system is a complete system. All instrumentation required to monitor the pressures and the levels are also included. - The system should be connected to the pipeline which is going to be protected. Piping and fittings required for this connection are not included as we do not know where the vessels will be located. Size of these fittings/piping should be of the same size (and drilling class) as the outlet of the vessel. Generally speaking, what will be needed is the following: a. T (main pipe line / Vessel outlet) b. Elbow c. Pipes with suitable lengths d. Isolating valve if it is required to isolate the vessel
Thick Ends/wallDia. x H (mm) PN
       Qty
Surge Vessel - PAA Type »
Copyright © 2G Products FZC All rights reserved. - Powered by Business Cloud