Pulsation Dampers PDP1200:
Design:tublar air chamber
Housing material: PVC or PP
Diaphragm material: Hypalon or Viton
Operating pressure: PN 10
Fitting: inline or by means of a T-fitting (unused end of the PDS is closed with a dummy plug) screwed on the pump valve (only PDS 80) or integrated in the pipe line using the attached pipe clamp or holding angle.
Dimensioning: according to MB 127 01 (the stroke volume mentioned below is the standard value for motor pumps with a residual pulsation factor of approx. +/- 10%
Connection: G2 3/4 a
Stroke volume of the pump: 1200 ml/stroke
